Product Group

garnet sand steel shot steel grit glass beads

Product Categories

Hardware Other Non-Metallic Minerals & Products

Download

All Products

Professional factory supply high quality reflective materials micro glass beads for road marking 1.With more drivers traveling on more roads, the need to promote safety - especially at night and during poor weather conditions - has been a continuing concern. 2.In response, HONEST HORSE has developed both materials and technology to improve visibility while enhancing driver safety. 3.Embedding glass beads into highway safety markings creates reflective lines that shine through darkness, rain, and fog to direct drivers more safely along the road.

Anti-Corrosion Treatment steel grit g80 used for blasting machine (1)Sandblasting for ShipbuildingWith grit blasting, oxygenated surface of ship hull is descaled,then improved the coating quality. (2)Castings Surface Pre-treatmentSteel grit can also be used for surface pre-treatment,cleaning and descaling for casting parts.(3)Bridge and Steel ConstructionPre-treatment and descaling for metal surface,increasing coating quality and antisepsis ability.

natural magnesium aluminum garnet sand 80 mesh for water jet cutting Waterjet cutting: Garnet sand has features of sub-conchoidal fracture, high hardness, good toughness and sharp edges. It can form new angular and edges constantly during crushing and classifying. Waterjet cutting uses garnet sand as the cutting medium, relies on high-pressure water jets to water jet cut oil and gas pipelines ,steel and other components ,stainless steel, copper,metal,marble,stone, rubber, glass, ceramics

Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand Steel Shot is manufactured by melting selected scrap in electric induction furnace.The chemical composition of molten metal is analyzed and strictly controlled by spectrometer to obtain SAE Standard specification.The molten metal is atomized and transformed into round particle and subsequently quenched and tempered in a heat treating process to obtain a product of uniform hardness and microstructure, screened by size according to SAE Standard specification.

KOC supplier garnet sand blasting 30/60 for oil and gas KOC supplier garnet sand blasting 30/60 for oil and gas Product Garnet Sand Specific Weight 4.1g/cm3 Average Bulk 2.4g/cm3 Crystal Systerm Cubic Fracture Sub--Conchoidal Al2 O3 16.60--18.10% Fe2 O3 27.80--29.85% Si O2 37.20--37.90% Mg O 4.70--4.51% Ca O 4.95--9.48% Ti O2 2.5-3.1% CHLORIDE CONTENT Less than 25 ppm SOLUBLE SALTS Less than 100 ppm PH OF AQUEOUS MEDIUM 6.93 Garnet (Almandite) 97-98% Imenite 1-2% Hardness 8.0(Mohs Scale) Conductivity Less than 25 Microsiemense per meter

1 << < 1 > >>